Flickering Stripes On The Monitor Screen; No Screen Display Or Display Drifts; No Mouse Pointer Displayed On The Screen - Fujitsu PRIMERGY 300 Operating Manual

Flickering stripes on the monitor screen

Flickering stripes on the monitor screen
!
Switch off the server immediately!
The flickering stripes are probably caused by an old-type screen that does not
support the horizontal frequency.
Ê Find out the horizontal frequency of your monitor screen. You will find the
horizontal frequency (also known as line frequency or horizontal deflection
frequency) in the documentation of your monitor.
Refer to the documentation for your operating system for how to set the
Ê
correct horizontal frequency for your monitor, and follow the procedure
accordingly.

No screen display or display drifts

The wrong frequency and/or resolution has been selected for the screen or for the
application program.
Refer to the documentation for your operating system for how to set the
Ê
correct monitor, and follow the procedure accordingly.

No mouse pointer displayed on the screen

If no mouse pointer is displayed, this may have the following causes:
Mouse driver not loaded
Check whether the mouse driver is properly installed and is present when the
Ê
application program is started. Detailed information can be found in the User
Guides of the mouse, the operating system or the application program.
Mouse controller disabled
The mouse controller must be enabled, if you use the supplied mouse or a PS/2
mouse.
Check in the BIOS Setup whether the mouse controller is enabled.
Ê
A26361-K423-Z202-3-7619
Troubleshooting and tips
41