Connecting The Server To The Power Voltage - Fujitsu PRIMERGY 300 Operating Manual

Connecting the server to the power voltage

Ê Check the rated voltage.
The rated voltage must agree with the local line voltage:
!
115 = 100 V to 125 V
If the rated voltage does not agree with the local line voltage, lift out
Ê
the plug-in unit with a screwdriver (1), turn it and replace it.
Plug the server's power cable into the server (1).
Ê
Ê Plug the server's power cable into the grounded power outlet (2).
A26361-K423-Z202-3-7619
Preparation for use and operation
1
230 = 200V to 240V
1
2
17