Table of Contents
Advertisement
Preparation for use and operation
Saving the EISA configuration
If your server has a system board with EISA slots (EISA bus), you must save the
EISA configuration. You can skip this step if your server does not have a system
board with EISA slots.
The server is fully configured when it is supplied. This configuration data
!
must, however, be saved to the configuration program diskette supplied
using the EISA configuration program. Detailed information on the EISA
configuration program is provided in the associated User's Manual.
The following EISA configuration disks are supplied with your server:
•
Configuration Utility Disk
•
Configuration Library Disk with additional CFG files
Ê
Insert the configuration utility disk in floppy disk drive. The disk must not be
write protected.
Restart your server.
Ê
Having run through its self-test, the server starts the EISA configuration utility from
the floppy disk. A logo appears.
Ê
Press any key to continue.
A welcome screen is displayed.
Ê
Press any key to continue.
The main menu appears.
Select the item Maintain system configuration diskette, and press the Enter key.
Ê
The Maintain System Configuration Diskette menu is displayed.
Press the Enter key to move forwards one menu level. Press [Esc]
i
move back one level or to Exit. Help texts are either displayed
automatically or can be called up by pressing the [F1]
22
[Esc] to
[Esc]
[Esc]
[F1] key.
[F1]
[F1]
A26361-K423-Z202-3-7619
Advertisement
Table of Contents
