Table of Contents
Advertisement
Keysight N7020A Power Rail Probe
User's Guide
1 General Information
Oscilloscope Compatibility
Accessories
Inspecting the Probe
Handling the Probe
Cleaning the Probe
Safety Information
Returning the Probe for Service
Contacting Keysight Technologies
The N7020A power-rail probe is designed for power integrity measurements such
as Periodic and Random Disturbances (PARD), static and dynamic load response,
and programmable power-rail response. The N7020A provides the following
advantages:
• Low noise due to a low attenuation ratio (1.1:1) and 50Ω output. See
on page 6 and
• A large ±24V probe offset range. The offset allows small signals (~1 mV), that
exist on top of a DC supply, to be centered on an oscilloscope screen for
maximum vertical sensitivity.
• Low DC loading due to a 50 kΩ input impedance at DC.
• Large ±850 mV active signal range in addition to the offset range
Before using the probe, refer to
CAUTION
care and refer to the safety notices in this manual. Avoid any mechanical shocks to this
product in order to guarantee accurate performance and protection.
7
8
15
16
17
18
20
21
Figure 2
on page 6.
"Safety Information"
on page 18. Handle the probe with
Figure 1
5
Advertisement
Table of Contents
