Procedure - Keysight N7020A User Manual

6
Performance Verification

Procedure

1 Connect the equipment as shown in
2 Power on the oscilloscope with the oscilloscope application maximized.
3 Power on the DMM and select the 2-wire Ohm display on the DMM.
Figure 18
4 Read the DMM display for the input resistance.
5 Record the result in
between 49 kΩ and 51 kΩ.
50
Test Setup
Table 10 on page 51. To pass this test the result should be
Figure 18.
N7020A User's Guide