Control Panel
–
17.12
Auto Arming Time
Item
Hour of the day (tens digit)
Hour of the day (units digit)
Minute of the day (tens digit)
Minute of the day (units digit)
These locations specify the time of day the system automatically arms itself in AWAY Mode.
Set this time in 24-hour format (for example, program 10:30 PM as 2230). If you want the
system to arm in STAY Mode 1, select Option 4 in Location 496.
If forced arming is disabled for any zone, the automatic arming feature operates regardless of
whether any zones are unsealed.
User Code 997 is reported when this feature is used. For partitioned control panels, both
areas are automatically armed in AWAY Mode at the same time each day.
See also
–
–
17.13
Auto Disarming Time
Item
Hour of the day (tens digit)
Hour of the day (units digit)
Minute of the day (tens digit)
Minute of the day (units digit)
These locations specify the time of day the system automatically disarms itself. Set this time
in 24-hour format (for example, program 10:30 PM as 2230).
User Code 997 is reported when this feature is used. For partitioned control panels, both
areas are automatically disarmed at the same time each day.
17.14
Kiss-Off Wait Time
Item
Increments of 500 ms (500 ms to 8
sec.)
This location sets the time the control panel waits for acknowledgment before resending a
report. This timer applies only to Contact ID and SIA Format.
17.15
Speaker Beep Volume
Item
Speaker Beep Volume
This location allows you to adjust the speaker volume for remote radio operation.
Bosch Security Systems, Inc.
Output Event Types, page 123
Location
0482
0483
0484
0485
Consumer Options 1, page 141
Zone Options 2, page 101
Location
0486
0487
0488
0489
Location
0490
Location
Option
0491
0 = No Beeps
15 = Loudest Beeps
Option
Option
Option
Installation Guide
System Event Timers | en
Default
New
0
0
0
0
Default
New
0
0
0
0
Default
New
3
Default
New
13
2017.10 | 03 | F.01U.298.026
137