Control Panel
11.8
Network Module Cloud Connection
Item
Module 1 Cloud
Connection
Module 2 Cloud
Connection
If with text codepad, go to menu 721 Network Module to enable/disable the cloud module
B4xx-M.
11.9
Password for A-Link Connection
Item
Password for A-Link
Plus/RSC Connection
Theses locations store up to 10-digit password for A-Link or RSC connection. The A-Link / RAC
Password in the A-Link Plus software must be the same one as programmed in these
locations.
Defaulted password is 0000000000 for both in control panel and in A-Link Plus.
11.10
DTMF Timing Compensation
Item
DTMF Timing
Compensation
DTMF Timing Compensation is used to pre-compensate signal distortion generated by digital
telephone applications (Fiber telephone, VoIP, or GSM module). It can help to reduce failures
in alarm communication.
DTMF Timing Compensation works only with Contact ID format. Defaulted 0 is to disable this
function and the communication capabilities remains the same .
Enable this function by selecting value from 1 to 9 when it is really necessary. 9 is for highest
compensation, but not higher is better. Select the optimal value by bidirectional testing from
4.
11.11
Country Codes
Item
Country codes
Value 0 is also for Singapore.
11.12
Telco Arming Sequence
Item
Telco Arming Sequence
(Call Forward On)
Bosch Security Systems, Inc.
Location
Option
4456
0 = Disable
4 = Enable
7456
Location
Option
0083 - 0092
Location
Option
0111
0 = Disable
1 – 9 = Timing compensation
Location
Option
0112
0 = Australia
1 = China
Location
Option
0113 - 0142
15 = Telephone termination
Installation Guide
Communication Information | en
Default
New
0
0
Default
New
0
Default
New
0
Default
New
0
Default
New
15
2017.10 | 03 | F.01U.298.026
73