Introduction | en Introduction Congratulations on selecting the Solution 2000 / Solution 3000 Control Panel to protect you and your property. To obtain the most from your unit, take time to read through this manual and familiarize yourself with the numerous outstanding operating features of this system. In all aspects of planning, engineering, styling, operation, convenience, and adaptability, we have sought to anticipate your every possible requirement.
Current Draw in Alarm Condition with 105 mA Codepad Back-Up Battery 7 Ah/12 VDC Rechargeable Sealed Lead Acid Battery Supplier Code N771 Tab. 2.1: Specifications Notice! Test the sirens, strobe, and zones at weekly intervals. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
System is armed in AWAY Mode. System is not armed in AWAY Mode. AWAY Flashing twice a sec with Setting STAY Mode 2 bypass zones. STAY indicator Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Page 8
The ON indicator lights when the system is armed and flashes when an alarm occurs. The indicator is reset after a valid User Code is entered. Tab. 3.2: Icon Indicators 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
One beep every 4 sec. During Auto Arming Pre-Alert Time, the warning before automatic arming takes place. One beep every 2 sec. During Exit Time when armed in AWAY Mode. Tab. 3.3: Audible Indicators Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Keyfob RFID [1500] System System option Home message [2500] Zone name [2536] Zone [381] STAY2 zone Without any codes, users can enter the general menu by pressing [-] key. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Page 11
Operation with TEXT LCD Codepad | en (No Passcode) Inquire Fault analysis Day alarm System Command Modem call init. Horn speaker test Test Bell test Strobe test Test report Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Method Two Hold down the [#] button until two beeps sound. The AWAY indicator displays and Exit Time starts counting. Tab. 5.5: How to Arm the System in AWAY Mode 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Any zones programmed to be automatically isolated in STAY Mode 2 flash until Exit Time expires. At the end of Exit Time, all zones selected to be automatically isolated extinguish and the codepad emits one short beep. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Area 1; or enter your user code followed by [0][2] and the [#] button ( for example, [258002#]) to disarm Area 2. Two beeps sound and the AWAY indicator extinguishes. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Enter [#] button to confirm the operation, or press [*] to cancel. How to Add a Radio Code (RADION Keyfob) Notice! Solution 2000 does not support RADION keyfobs. Set RF receiver as RADION Receiver. Enter your Master Code, followed by [1] and the [#] button (for example, [25801#]).
An audible alarm activates when you press the [1] and [3] keys or the [*] and [#] keys simultaneously. Contact your installer to disable the codepad panic alarm function or to silence the codepad panic alarm. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Press the [*] button followed by your User Code and the [*] button again to enter the Isolating Mode (for example, [*2580*]). Three beeps sound and the STAY indicator flashes. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
This fault occurs when any zone with tamper becomes an open or short circuit. Press the [3] key until two beeps sound. This displays the zone reporting the tamper fail fault. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
This feature is only applicable if your installer set up an output that can be turned on or off by the codepad or A-Link Plus. The output programmed by your installer can control a pool pump or outside lighting. Up to 20 separate outputs can be programmed. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
To disable the Telco Arm Sequence, enter the Call Forward Sequence as [*5] (terminator) for Step 3. 5.11.2 Telco Disarm Sequence Use this function to automatically disable the call forward sequence upon disarming the system. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Every time you test a zone, the codepad sounds one long beep, and the horn speaker sounds one short beep to indicate that the zone is activated when testing. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
(See below table). Press the [#] key to exit. There are 50 different tones, from1500 Hz to 5000 Hz. If multiple codepads are installed, each codepad can have a different tone. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Pressing the [*] key for 1 sec to 3 sec during the pause acknowledges the call. No further calls are made for that event. If the call was successfully acknowledged, a tone of decreasing pitch sounds. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Press the [*] key followed by the [5] and [#] keys(for example, [*5#]). The STAY and AWAY indicators are disabled. If there is more than one telephone number to disable, repeat step 1 to 3. Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
If Zone 2 is violated, the entry delay time is handed over to the Zone 2 and so on, to Zones 3 and 4. This is known as sequential hand- over delay. 2017.09 | 04 | F.01U.298.028 User's Guide Bosch Security Systems, Inc.
Page 27
A monitored input used to activate an alarm. A zone might be set up to activate an alarm only when the system is armed or to operate whether the system is armed or disarmed. Tab. 6.11: Glossary of Terms Bosch Security Systems, Inc. User's Guide 2017.09 | 04 | F.01U.298.028...
Need help?
Do you have a question about the Solution 2000 and is the answer not in the manual?
Questions and answers