Quick Start - Source Audio Ventris Dual Reverb User Manual

Quick Start

Power
To power the unit, connect the included 9V DC power supply to the jack labeled DC 9V on the back
panel.
Warning: Using a non-Source Audio supply, especially an unregulated supply, could damage the unit.
A power supply with insufficient current levels may also cause noise or other unpredictable behavior.
Please be very cautious when using 3
requirements printed on the bottom of the Ventris housing.
Guitar/Audio Connections
Using standard ¼" mono cables, connect your guitar, bass, or other instrument to the I
and your amp (or the next audio device in the signal chain) to the O
amp, connect it to O
When the power and audio connections have been made, the Ventris is ready for use.
Brief Knob, Footswitch, and Button Descriptions
TIME: Controls the duration of the reverb. Turn the TIME knob counter-clockwise to shorten the
circulation time of the reverb and clockwise to lengthen it. Setting the TIME knob fully clockwise will
SA262
rd
-party power supplies and refer to the power supply
2.
UTPUT
Ventris Dual Reverb Owner's Manual
NPUT
1 jack. If you have a second
UTPUT
1 jack
5