Quick Start - Source Audio SA144 User Manual

QUICK START

1. POWER
To power the unit, connect the included
the jack
9V DC
could damage the unit and void the warranty.
2. GUITAR/AUDIO CONNECTIONS
Next, plug your guitar (or other instrument) into the jack labeled
via a standard ¼" cable. Connect your amp (or other audio
GUITAR IN (B)
device) to the
GUITAR OUT
Both input and output are mono signals.
3. SENSOR IN (optional)
To use your Poly-Mod Pro with a Hot Hand sensor, connect the sensor
to the
SENSOR IN (D)
sensor
SENSOR
IN
D
4. BRIEF KNOB AND PEDAL DESCRIPTIONS
See Controls section for more details.
selects desired filter type
A EFFECT:
B SWEEP RANGE:
filter sweep or the depth of the
C FREQUENCY:
4 | Quick Start
on the back panel. Note: Using a different supply
(A)
jack
(C)
jack and follow any instructions given with the
GUITAR IN EXP IN
B
adjusts the direction (up/down) and breadth of the
adjusts the center frequency of the filter
adapter power supply to
DC
, again with a standard ¼" cable.
MIDI IN
SENSOR
GUITAR OUT
C
and Hot Hand modulation.
LFO
OUT
9V DC
A