Quick Start - Source Audio Lunar Phaser User Manual

Quick Start

Power
To power the unit, connect the included 9V DC power supply to the jack labeled DC 9V on the back
panel.
Warning: Using a non-Source Audio supply, especially an unregulated supply, could damage the unit.
Please be very cautious when using 3
Guitar/Audio Connections
Using standard ¼" mono cables, connect your guitar, bass, or other instrument to the INPUT 1 jack
and your amp (or the next audio device in the signal chain) to the OUTPUT 1 jack.
When the power and audio connections have been made, the Lunar is ready to play.
Brief Knob, Footswitch, and Button Descriptions
Depth Knob: Controls the depth of the Low Frequency Oscillator (LFO), which determines the
strength or prominence of the phaser effect.
Speed Knob: Controls the frequency of the LFO, which determines the speed of the phaser effect.
Resonance Knob: Controls the resonance of the effect by feeding the output back into the input –
higher resonance could be described as "intense," "brighter" or "chime-like."
Shape Knob: Sets the shape of the LFO – choose between Sine, Square, Sawtooth, and more.
SA241
rd
-party power supplies.
Lunar Phaser User's Guide 3