Rubber Feet; Waste Disposal Notes; Warranty - Source Audio Ventris Dual Reverb User Manual

•
Important! By creating a custom MIDI CC mapping, the default CC mapping described in the
MIDI Implementation document will be cleared and can only be recovered by performing a
Factory Reset. You should only create a custom MIDI CC mapping if you know what you are
doing. If you are unsure, then we recommend sticking to the default mapping.
To create a custom MIDI CC mapping, follow these steps:
•
If necessary, press the C
•
Press and hold the C
•
Send the desired MIDI CC (with any value) to the Ventris via the MIDI I
C LED will begin to blink quickly when the MIDI CC is received.
ONTROL
•
Important! The next step (if you are performing it for the first time) will clear the default
MIDI CC mapping. If you wish to back out, now is the time to do it. You can press the C
I B
NPUT UTTON
•
If you wish to map this CC to a knob, turn the desired knob. If the mapping was successful,
the C
ONTROL
•
If you wish to map this CC to a Neuro Parameter, move the corresponding control in the
Neuro App to send that parameter data to the Ventris. If the mapping was successful, the
C LED will be lit solid, indicating that the mapping is complete.
ONTROL

Rubber Feet

The Ventris comes standard with a flat aluminum bottom, making it easy to apply Velcro and mount
to a pedalboard. Additionally, adhesive rubber feet are included in the Ventris box. Applying the
rubber feet to the Ventris can help prevent it from sliding on flat surfaces such as a hardwood floor.

Waste Disposal Notes

If possible, dispose of the device at an electronics recycling center. Do not dispose of the device with
the household waste.
For full compliance with EN 61000-4-6 standard, input cable must be less than 3 meters in length.

Warranty

Limited Transferrable Warranty
Source Audio, LLC (hereinafter "Source Audio") warrants that your new Source Audio One Series
Ventris Dual Reverb, when purchased at an authorized Source Audio dealer in the United States of
America ("USA"), shall be free from defects in materials and workmanship under normal use for a
period of two (2) years from the date of purchase by the original purchaser. Please contact your
dealer for information on warranty and service outside of the USA.
Under this Limited Warranty, Source Audio's sole obligation and the purchaser's sole remedy shall be
repair, replacement, or upgrade, at Source Audio's sole discretion, of any product that, if properly
used and maintained, proves to be defective upon inspection by Source Audio. Source Audio reserves
SA262
I
ONTROL NPUT
I B
ONTROL NPUT UTTON
to exit the mapping and leave the default MIDI CC map intact.
LED will be lit solid, indicating that the mapping is complete.
Ventris Dual Reverb Owner's Manual
B to make the C
UTTON ONTROL
until the C LED begins to blink.
ONTROL
LED illuminate.
J or USB. The
NPUT ACK
ONTROL
58