Quick Start - Source Audio L.A. Lady Overdrive User Manual

Quick Start

Power
To power the unit, connect the included 9V DC power supply to the jack labeled DC 9V on the back
panel.
Warning: Using a non-Source Audio supply, especially an unregulated supply, could damage the unit.
Please be very cautious when using 3
Guitar/Audio Connections
Using standard ¼" mono cables, connect your guitar, bass, or other instrument to the I
and your amp (or the next audio device in the signal chain) to the O
When the power and audio connections have been made, the L.A. Lady is ready to play.
Brief Knob, Footswitch, and Button Descriptions
Drive Knob: Controls the amount of gain into the overdrive circuit, which sets the amount of
distortion and sustain.
Level Knob: Controls the overall output level.
Bass Knob: Controls the level of the bass frequencies in the drive circuit.
Treble Knob: Controls the level of the treble frequencies in the drive circuit.
Effect Switch: Selects between the three basic Overdrive effect types – Classic, Crunch, and Smooth.
Footswitch: Enables or bypasses the Overdrive effect. The O
Overdrive effect is engaged.
SA244
rd
-party power supplies.
L.A. Lady Overdrive User's Guide
1 jack.
UTPUT
/O LED will be lit green when the
N FF
1 jack
NPUT
3