Controls - Source Audio Ventris Dual Reverb User Manual

Controls

Time Knob
Sets the sustain time of the reverb trail. Turning the TIME knob to the fully clockwise position causes
the reverb trail to sustain infinitely. However, unlike the HOLD function (which creates a steady reverb
loop), setting the TIME knob set to infinite sustain will create a degenerating effect over time as the
reverb continues to circulate and receive additional dry signal. The results can be a bit cacophonous,
but it will create a very interesting effect.
Mix Knob
Sets the relative levels of dry signal and wet reverb signal. Fully counter-clockwise is 100% dry, fully
clockwise is 100% wet. Roughly 3 o'clock on the MIX knob is where a 50/50 split between wet and
dry occurs. Please note that Kill Dry Mode is also available as a global option (see
Defeat).
100% Dry
Dry
Wet
SA262 Ventris Dual Reverb Owner's Manual
Kill Dry / Dry
50% Wet
100% Wet
50% Dry
Wet
Dry
20