Quick Start - Source Audio Nemesis Delay User Manual

Tap Tempo – The T
AP
subdivisions.
External Control – The Nemesis can be easily configured to work with a variety of expression pedals
and footswitches for various external control options.
Hold Mode – Sustain your delay sounds with the HOLD function. The delayed audio is repeated
infinitely for ambient sustain effects.

Quick Start

Power
To power the unit, connect the included 9V DC power supply to the jack labeled DC 9V on the back
panel.
Warning: Using a non-Source Audio supply, especially an unregulated supply, could damage the unit.
Please be very cautious when using 3
requirements printed on the bottom of the Nemesis housing.
Guitar/Audio Connections
Using standard ¼" mono cables, connect your guitar, bass, or other instrument to the I
and your amp (or the next audio device in the signal chain) to the O
amp, connect it to O
When the power and audio connections have been made, the Nemesis is ready to use.
SA260
F allows users to directly set the delay time, with optional beat
OOTSWITCH
rd
-party power supplies and refer to the power supply
2.
UTPUT
Nemesis Delay User's Guide
NPUT
1 jack. If you have a second
UTPUT
1 jack
3