Chapter 5
Upgrade Firmware
86
Install the Firmware from the Storage Device
Follow these steps to transfer firmware files from a storage device.
1. Open the system information screen on the terminal to verify that the new
firmware version is correct.
Firmware Version:
Boot Code Version:
Logic Board Version:
Terminal On Time:
See
View System Information on page 56
the current firmware version.
2. Insert the storage device into the USB host port or micro-SD card slot on
your terminal.
3. When prompted to run the Autorun, press Yes or the F1 key.
The splash screen appears and the progress bar indicates a firmware
installation is in process.
Do not remove the micro-SD card or USB flash drive until
IMPORTANT
upgrade - OK is displayed.
When the firmware installation is complete and successful, the progress
bar stops with the success code OK.
4. The terminal will automatically restart to complete the process.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
System Information
3.011.000
2.020.000
4
102,330
Display On Time:
102,330
Battery Status:
Good
Memory Usage (bytes)
Internal Used:
1,392,640
Internal Free:
164,741,120
Application Used:
31,600,640
Application Free:
193,994,752
for instructions on how to view
Advanced
Main