Allen-Bradley PanelView 800 2711R-T4T User Manual page 104

Chapter 8 Troubleshoot the System
PanelView 800 Terminal Alerts
Category ID
Recipe 1021 Recipe /*S:0 Param1*/ failed. Cause: Unable to
Recipe 1022 Recipe /*S:0 Param1*/ failed. Cause: Unable to
Recipe 1023 Recipe download failed. Cause: The value /*S:0
Recipe 1024 Recipe /*S:0 Param1*/ failed. Cause: Table does
Recipe 1025 Recipe /*S:0 Param1*/ of recipe /*S:0
Recipe 1026 Recipe Upload Failed.
Recipe 1027 Recipe operation in progress.
Alert 2000 Loading.
Alert 2001 Unloading.
Alert 2002 Terminal is starting up...
Alert 2003 Application is currently being edited, user input is
Alert 2004 Copying file...
Alert 2005 Deleting file...
Alert 2006 Operation failed.
Alert 2007 Operation succeeded.
Alert 2008 Cannot run application. Application version
Alert 2009 Cannot run application. Communication
Alert 2010 This application is not validated. Are you sure you
Alert 2011 Cannot run a modified application.
104
Description
read from /*S:0 Param2*/
read from Tag.
Param1*/ is greater than the maximum value
/*S:0 Param2*/ allowed for ingredient /*S:0
Param3*/
not contain a recipe.
Param2*/failed. Cause: · Recipe file not
accessible.
disabled.
incompatible.
connection not supported.
want to run a non-validated application?
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Corrective Action
Check the communication settings, and data point
specification.
Check the communication settings, and data point
specification.
Correct the dataset value.
Restore the recipe in the table before doing a save
operation.
Try to reload the application to see if the recipe is
still there, or restore from a .cha file from your
computer or SD card.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
Put the application into Test or Run mode to enable
user input.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
This message is for informational purposes. No
corrective action needed.
Edit, validate, and then save the application with
this version and try again.
Terminal does not support the communication
connection configured in this application. Edit the
application and configure communication for the
supported connection type.
If you do not want to run the invalid application,
cancel the operation, then edit and validate the
application. Correct all validation errors, save the
application, and try again.
Save the application and try again.