Allen-Bradley PanelView 800 2711R-T4T User Manual page 105

PanelView 800 Terminal Alerts
Category ID
Alert 2012 Application has been modified. Continue without
Alert 2013 Currently loaded application has been modified.
Alert 2014 Application was designed for a different terminal
Alert 2015 Application will be unloaded and deleted.
Alert 2016 Confirm deletion?
Alert 2017 Confirm restart?
Alert 2018 File already exists. Overwrite?
Alert 2019 Cannot copy over loaded application. Unload
Alert 2020 Cannot copy over loaded application.
Alert 2021 Insufficient space to complete file copy.
Alert 2022 Source and destination cannot be the same.
Alert 2023 Application has been left in edit or test mode.
Alert 2024 File not found.
Recipe 2025 Copy failed. Only existing recipe files can be
Recipe 2026 Copy failed. Invalid recipe file.
Alarm 2027 Alarm logs can only be copied from a loaded
Alert 2028 Files can only be copied to a secured application
Alert 2029 Files can only be copied from a secured
Alert 2030 Cannot delete a loaded application.
Alert 2031 Files can only be deleted from a secured
Alert 2032 Return to out of box condition?
Alert 2033 Source file does not exist.
Description
saving?
All changes will be lost by running this
application. Continue?
type and may not appear or operate as intended.
Continue?
Continue?
application and continue with overwrite?
updated.
application.
while editing the application.
application while editing the application.
application while editing the application.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Troubleshoot the System
Corrective Action
Edit the application and save prior to performing this
operation, otherwise changes to the application may
be lost.
Edit the application and save prior to performing this
operation, otherwise changes to the application may
be lost.
Edit the application on the terminal type that it is
intended for.
Click Yes to continue with operation.
Click Yes to delete the file.
Press Yes to restart the terminal.
If you do not want to overwrite the file, cancel the
operation and rename the file before performing this
operation.
Click OK to unload and overwrite the application.
Unload application and try again.
Remove files to free space from the destination and
try again.
Verify the source and destination are not the same
and retry.
Reconnect the designer or press OK to proceed to
the configuration screens.
Verify the location of the file and try again.
Create the recipe through the designer or rename
this recipe to the existing recipe name and try again.
The imported recipe must have the same number of
ingredients and data sets as the existing recipe it is
replacing.
Load the application into Edit, Test, or Run mode and
retry.
The application has been secured with design
rights. Load the application into Edit mode and retry.
The application has been secured with design
rights. Load the application into Edit mode and retry.
Unload application and try again.
The application has been secured with design
rights. Load the application into Edit mode and retry.
Press Yes to reboot the terminal and return to the
out of box condition.
Make sure the source file exists and retry.
Chapter 8
105