Allen-Bradley PanelView 800 2711R-T4T User Manual page 37

Follow these steps to reboot the terminal from the terminal.
1. Go to the main configuration screen.
File Manager
Communication
Display
System Information
2. Press Reset Terminal.
3. Press Yes to confirm.
Change the Startup Application
You can select or change the application that runs on the terminal each time the
terminal starts up. Only applications in the internal storage of the terminal can be
run or set as a Startup Application.
If the application list is empty, the run, copy, delete, and set as
IMPORTANT
startup functions will not perform any action.
Follow these steps to select or change the startup application using PanelView
(1)
Explorer.
1. Go to the PanelView Explorer Startup window.
2. Click the Terminal Settings link.
3. Click the System Information tab.
(1)
The PanelView Explorer feature is not supported on PanelView 800 terminals from firmware revision 3.011
onwards.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Configuration Mode
Main
Current Application
Config Language
English
Português
Français
Italiano
Deutsch
Español
简体中文
Reset Terminal
Chapter 2
Goto
Date and Time
Day Hour
14 10
Month Minute
1 30
Year Second
2015 56
37