Allen-Bradley PanelView 800 2711R-T4T User Manual page 114

Chapter 8 Troubleshoot the System
114
Settings Cleared or Reset to Default When Using Restore or Out-of-Box Condition
Setting
Display Brightness
Display Timeout
Terminal Name
Follow these steps to restore the terminal.
1. While the terminal is not powered, use a small pointed object to press and
hold the Restore button located underneath the battery cover.
Restore button
2. Power up the terminal.
3. Wait until the fault indicator lights up solid red, or the text "GO" is
displayed on the screen before releasing the Restore button.
©2016 Rockwell Automation, Inc.
All Rights Reserved.
BOOT
4. Wait for a few minutes until the process is completed.
5. When the restore process is completed, the terminal will boot into the
main configuration screen.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Restore
N
N
N
GO
Out-of-Box Condition
Y
Y
Y