Chapter 2
Configuration Mode
50
2. Press Communication.
Protocol:
Status:
Device Name:
Node Address:
IP Mode:
IP Address:
Mask:
Gateway:
MAC Address:
3. Press Port Settings.
Ethernet:
4. The Ethernet and Serial ports are enabled by default. Press Enable for the
respective port to disable it, then press OK to confirm.
If the Ethernet port is disabled, you cannot set a static IP
IMPORTANT
address for the terminal. The terminal will prompt an alert (ID:
2058) when you try to do so.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Communication
*
Unavailable
PV800T7T
0
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
XX:XX:XX:XX:XX
Port Settings
Enable
Serial:
Enable
Disable DHCP
Set Static IP Address
VNC Settings
Port Settings
Main
Back