Allen-Bradley PanelView 800 2711R-T4T User Manual page 144

Appendix E Protected Mode
144
To exit Protected mode, the running application has to be stopped and unloaded
successfully. To unload an application, go to the File Manager configuration
screen on the terminal and press the Stop Application button.
Source:
Internal
PVcApplication1
Recipe Copy Alarm History
Startup Application
The Stop Application button is only available in firmware
IMPORTANT
revision 3.011 onwards.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
File Manager
To:
Internal
Controller Settings
Reset
Copy
Delete
Set As Startup
Run
Stop Application
Main