Allen-Bradley PanelView 800 2711R-T4T User Manual page 53

2. Press Communication.
Protocol:
Status:
Device Name:
Node Address:
IP Mode:
IP Address:
Mask:
Gateway:
MAC Address:
IMPORTANT
3. Press Disable DHCP.
The IP Mode now displays the text "Static".
4. Press Set Static IP Address.
The Static IP Address screen appears.
IP Address:
Mask:
Gateway:
5. Press the blue area next to IP Address to enter an IP address in the Static IP
address field.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Communication
*
Unavailable
PV800T7T
0
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
XX:XX:XX:XX:XX
The MAC Address value display is only available in
firmware revision 3.011 onwards.
Static IP Address
0.0.0.0
0.0.0.0
0.0.0.0
Configuration Mode Chapter 2
Disable DHCP
Set Static IP Address
VNC Settings
Port Settings
Main
Back
53