Allen-Bradley PanelView 800 2711R-T4T User Manual page 54

Chapter 2 Configuration Mode
54
Type in the desired IP address using the on-screen keypad, then press
Enter.
169.254.158.177
Esc F1 F2 F3
1 2
` IP Address:
q w
Mask:
a s
Caps
z x
Shift
Gateway:
Ctrl Win Alt
6. Repeat step 5 to enter the address for the Subnet Mask and Gateway
Address.
Enable Terminal Security
Use terminal security to restrict user access to the PanelView Explorer Startup
window. For example, you can require users to enter a user name and password
before accessing the PanelView Startup window.
You cannot enable terminal security from the on-terminal
TIP
configuration screens. If you want to change this setting, you must
connect to the terminal through a web browser.
(1)
The web browser feature is not supported on PanelView 800 terminals from firmware revision 3.011 onwards.
The PanelView Explorer feature is only supported on PanelView 800
IMPORTANT
terminals with firmware revision 2.020 or earlier. It is not supported
from firmware revision 3.011 onwards.
Initially, the terminal and the PanelView Explorer Startup window are unsecured.
To enable security, provide a password. The default user name is Admin. The new
password takes effect the next time the terminal is restarted.
As long as security is enabled, any user that tries to access the PanelView Explorer
Startup window must first log in with a valid user name and password.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Static IP Address
F4 F5 F6 F7 F8 F9 F10 F11 F12
3 4 5 6 7 8
0.0.0.0
e r t y u i
0.0.0.0
d f g h j k
c v b n m ,
0.0.0.0
ins
Home End
9 0 - =
o p [ ] \
l ; '
. /
del
Back
(1)