Allen-Bradley PanelView 800 2711R-T4T User Manual page 78

Chapter 5 Upgrade Firmware
78
2. Click Stop to unload the currently loaded application.
The stop sign is shown when an application is loaded and in Test/Run
mode.
To stop an application from the terminal, go to the File Manager
configuration screen and press the Stop Application button.
Source:
Internal
Recipe Copy Alarm History
Startup Application
IMPORTANT
If you have not saved changes to the application, you are prompted to do
so. Once the application is unloaded, the terminal displays the
Configuration screen.
3. Close the web browser connected to the terminal.
Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Click to stop and unload application
File Manager
To:
Internal
Controller Settings
Reset
The Stop Application button is only available in firmware
revision 3.011 onwards.
Copy
Delete
Set As Startup
Run
Stop Application
Main