Raymarine autopilot control unit Owner's Handbook Manual page 82

Chapter 6: Commissioning the Autopilot
AutoLearn calibration
1
Enter Seatrial Calibration
2 sec
2
Start the AutoLearn
To prepare for the AutoLearn:
• steer straight ahead at cruising speed
(planing boats – off the plane)
• head into wind and waves
x4
3 Boat completes AutoLearn
!
If you need to cancel the AutoLearn, press
4
Save new settings
x2
Check you have sufficient
clear sea space before proceeding
After
7 to 27
steps
or
2 sec
AutoLearn in progress
AutoLearn successful
Note: If you see a
LRN FAIL message,
press disp to return to
the AUTOLEARN screen
then repeat from Step 2
To:
• save AutoLearn calibration settings
• return to STANDBY mode
69
D5480-1