Chapter 2: Basic Operation - Raymarine autopilot control unit Owner's Handbook Manual

Chapter 2: Basic Operation

Chapter 2: Basic Operation
The sections in this chapter explain how to use the basic functions on
your ST7001+ autopilot control unit:
2.1
2.2
2.3
Note: If you are using the control unit with a non-150/400 autopilot
system, refer to the notes in the Appendix.
Using the control unit
Summarizes the key functions and screen layout on the
ST7001+ control unit.
Using Auto mode
Provides instructions for engaging/disengaging the
autopilot, using Auto mode and adjusting the
autopilot's performance.
Adjusting display/keypad lighting and
contrast
Explains how to change the lighting and contrast on
the control unit display and keypad.
3
page 4
page 6
page 15