Table of Contents
Advertisement
If you don't have 4G coverage, you can save power by selecting
To automatically connect to the network upon loss of connection or when the device powers on,
select
Connect Automatically
Alert Information
The alerts icon indicates whether there are any alerts (situations that require your attention).
Note:
To view alert information, you must be logged in. New alerts are checked upon device power-up.
That is, if an event occurs, you won't be notified until the device is restarted.
No alerts are available.
One or more alerts are available.
The text next to the icon indicates the number of alerts.
Click the icon to display the Alert window. (For more information, see "Alerts" on page 34.)
GPS Information and Settings
(flashing)
The text next to the icon displays the GPS status, for example, "GPS not enabled" or "GPS searching
for satellites."
Click the icon to display the GPS Information and Settings window. The window shows the GPS status
and, if available, location information, including:
● HEPE
— The Horizontal Estimated Position Error reflects accuracy (horizontal/vertical precision).
Note:
For best results, minimize the number of obstructions between your device and the GPS satellites.
● Timestamp
— This indicates the time of the last fix.
42
Using Your Device
.
GPS is off (not enabled).
Before you can use GPS, you must accept the GPS privacy agreement and
enable GPS. (See "GPS Privacy Agreement" on page 35 and "Enabling
GPS" on page 55.)
GPS is on and available. (The GPS privacy agreement has been accepted,
and GPS is enabled.)
GPS is active (acquiring a location fix).
.
3G Only
Advertisement
Table of Contents
