Procedure 6.3 - Modem Settings In The System Manager Cip - Emerson Lorain CIP 4890 AP6C55CB User Manual

Procedure 6.3 – Modem settings in the System Manager CIP
User Manual
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Step
In Settings \ System Manager IP \ PPP Settings \ General Settings \
1
Communication Mode, change Media Selection for PSTN Modem as
shown in this screen.
In Settings \ System Manager IP \ PPP Settings \ General Settings \
2
Communication Mode, enable PPP in use as shown in this screen.
In Settings \ System Manager IP \ PPP Settings \ TCP/IP Settings, apply
3
Set Factory Default Setting as shown in this screen.
Communicating with the System Manager IP
Action
–continued–
153
UM6C55C (P7000597)
Standard 10.00 (March 2008)