Emerson Lorain CIP 4890 AP6C55CB User Manual page 126

126 Configuring and operating the system
Clicking on SNMP Settings in the submenu screen for System Manager CIP
settings will display the following screen.
Screen 55
System Manager CIP
System Manager CIP Only: The Community Settings are configurable by
the user. To set a Community Setting, enter the new setting in its respective
box and confirm the new setting by clicking on the
The System Manager CIP can manage up to 3 locations called Trap
Addresses.
To set the trap addresses, enter the new trap address 1, 2 and 3 in their
respective fields and confirm the new addresses by clicking on the
button in the applicable box.
UM6C55C (P7000597)
Standard 10.00 (March 2008)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Note 1: To make a new trap address active, the System Manager CIP must
be restarted (Refer to section 5.6.6.13 Restart).
Note 2: The Community Settings are imbedded in the System Manager
CIP and are the followings: Read: Public, Write: Private.
button.
Lorain Power System (AP6C55CA/CB)
User Manual