Lorain Cip Shelves; Table 3.3 - Mechanical Specifications Of Lorain Cip Shelves - Emerson Lorain CIP 4890 AP6C55CB User Manual

26 Specifications
3.2.2.

Lorain CIP shelves

The Lorain CIP shelves provide three (19" mounting) or four (23" mounting)
plug-in positions for the rectifiers, one plug-in position for the controller, a
connecting section for the batteries and the distribution, and a rear or front
access connecting section for the AC input.
3.2.2.1. Mechanical specifications of the Lorain CIP shelves
The mechanical specifications of empty Lorain CIP shelves are listed in the
following table.
Table 3.3 – Mechanical specifications of Lorain CIP shelves
Figure 3.1 illustrates a front view of an empty AP6C55CA Lorain CIP 48120
power system using an AP5C55BB power shelf (23"-mounting) with four
UM6C55C (P7000597)
Standard 10.00 (March 2008)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Note 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Note 2: The user should not make changes or modifications not expressly
approved by Emerson Network Power. Any such changes could void the
user's authority to operate the equipment.
Shelf Shelf
AP5C55BA
AP5C55BB
AP5C55BC
AP5C55BE
AP6C55CA
AP5C55BG
AP5C55BH
AP6C55BF
AP5C55CA
AP6C55CB AP5C55CB
AP5C55CC
Width Height
133 mm 305 mm
584 mm
(23 in.)
(5.25 in.) (12.0 in.)
133 mm 305 mm
483 mm
(19 in.)
(5.25 in.) (12.0 in.)
Lorain Power System (AP6C55CA/CB)
Depth Weight
10 kg (22 lb)
9.8 kg (21.6 lb)
9 kg (19.8 lb)
User Manual