Emerson Lorain CIP 4890 AP6C55CB User Manual page 15

Lorain cip 4890/48120 lorain cip access 48120 power systems ap6c55ca/cb
Table of Contents

Advertisement

User Manual
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CAUTION!
Access to this equipment should be restricted.
This power system must be installed in a restricted location
accessible to trained personnel only.
CAUTION!
Generator requirements
For proper operation and reliability of your AP6C55CA/CB
Lorain CIP and Lorain CIP Access power systems, AC
generators should meet requirements set forth in the Emerson
Network Power "Engine Alternator Standard" document,
available from Emerson Network Power. Contact your
applicable technical support line or your local sales
representative for a copy of this document (refer to the 2
page before last of this manual for the applicable telephone
number).
CAUTION!
Prevent damages to equipment.
Before starting up newly installed AP6C55CA/CB Lorain
CIP and Lorain CIP Access power systems and attempting to
configure the settings, make sure that all AC cables and other
distribution and battery cabling have been run and connected
by qualified personnel, as described in the power system
installation manual, IM6C55C.
CAUTION!
Prevent damages caused by electrostatic
discharges (ESD).
This equipment includes solid-state devices sensitive to
electrostatic discharges (ESD). When performing
maintenance or repair procedures on AP6C55CA/CB Lorain
CIP and Lorain CIP Access power systems, it is therefore
required to wear an appropriate antistatic device (a bracelet
for example) that is properly connected to a designated
antistatic grounding point (on a framework, an anti-static
floor mat or workbench mat, etc.). ESD-protective packaging
material shall also be used when carrying/shipping ESD
sensitive material.
About this document 15
nd
UM6C55C (P7000597)
Standard 10.00 (March 2008)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lorain cip 48120 ap6c55caLorain cip access 48120

Table of Contents