Remote Access To The Gui Of The System Manager Cip; Home Screen - Emerson Lorain CIP 4890 AP6C55CB User Manual

While the battery test is running, the START button in the Battery Test menu
will have changed to STOP. To stop the test, press the STOP button, and the
YES button in the next screen, or wait until the battery test is completed.
5.5.8.7. Start LED Test
This submenu is used to start a LED test. To start the test, press the START
button. All LED indicators on all the units in the system will be lit for 30
seconds.
5.6.

Remote access to the GUI of the System Manager CIP

This section describes how to navigate through the graphical user interface
(GUI) of the System Manager CIP from a remote computer in order to view
and/or configure the operating parameters of the Lorain CIP or Lorain CIP
Access power system.
For information on how to access the System Manager CIP remotely, see
Chapter 6, titled "Communicating with a System Manager CIP".
To access a menu or carry out a function in the GUI of the System Manager
CIP, use the computer mouse to place the cursor on the name of the screen to
be displayed, or on the function to be carried out, then click on the left button
of the mouse and follow the instructions as described in the following
subsections.
5.6.1.

Home screen

Once logged to the System Manager CIP, the computer will display a screen
similar to the following, referred to as the Home screen.
User Manual
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Note: There is a hardware switch on the System Manager CIP, which,
when activated, prevents any remote action on the controller. The access is
then read-only for all levels of password. For information on activating or
deactivating this switch, refer to Chapter 6, "Communicating with the
System Manager CIP".
Configuring and operating the system 69
Standard 10.00 (March 2008)
UM6C55C (P7000597)