Super Io Configuration; Serial Port 0 Configuration - Nexcom NISE 104 User Manual

Chapter 4: BIOS Setup

Super IO Configuration

This section is used to configure the I/O board Super I/O chip.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
Main Advanced Chipset
Legacy OpROM Support
Launch Lan1 PXE OpROM
Launch Lan2 PXE OpROM
CPU Configuration
IDE Configuration
USB Configuration
Super IO Configuration
H/W Monitor
PPM Configuration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Boot Security
System Super IO Chip
Parameters
[Disabled]
[Disabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Serial Port 0 Configuration

Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
Main Advanced Chipset
Serial Port 0 Configuration
Serial Port
Device Settings
Device Settings
Onboard Serial Port Max Baud Rate
Onboard Serial Port Max Baud Rate
115200 bps
921600 bps
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
This field configures the maximum baud rate of the serial port 0, the options
are 115200 bps and 921600 bps.
50
Save & Exit
Boot Security
Change the Serial Port Max Baud
Rate. Select <115200 bps> or
<921600 bps>
[Enabled]
IO=3F8H; IRQ=4;
[IO=3F8H; IRQ=4;]
[115200 bps]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 104 User Manual