It8783F Super Io Configuration; Serial Port 0 Configuration - Nexcom NISE 3700E User Manual

Chapter 4: BIOS Setup

IT8783F Super IO Configuration

This section is used to configure the serial ports.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
IT8783F Super IO Configuration
IT8783F Super IO Chip IT8783F

Serial Port 0 Configuration


Serial Port 1 Configuration

Serial Port 2 Configuration

Serial Port 3 Configuration

Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
IT8783F Super IO Chip
Displays the Super I/O chip used on the board.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 0 Configuration
This section is used to configure serial port 0.
Set Parameters of Serial Port
O (COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port 0 Mode
Configures the serial port mode to RS232, RS422, RS485 or RS485 Auto.
Onboard Serial Port Max Baud Rate
Configures the max baud rate of the serial port.
54
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [IO=3F8h; IRQ=4;]
Onboard Serial Port 0 Mode [RS232]
Onboard Serial Port Max Baud Rate [115200 bps]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 3700E Series User Manual