AudioCodes Mediant 1000 User Manual page 317

SIP User's Manual

To configure BRI supplementary services:
1. Open the ISDN Supp Services Table page (Configuration tab > VoIP menu > GW
and IP to IP submenu > Digital Gateway submenu > ISDN Supp Services).
2. Configure the parameters as described in the table below.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.
5. To register the BRI endpoints, click the Register button. To unregister the BRI
endpoints, click Unregister. The registration method for each BRI endpoint is
according to the setting of the 'Registration Mode' parameter in the Trunk Group
Settings page.
Table 18-20: ISDN Supplementary Services Table Parameters
Parameter
Phone Number
Module
Port
User ID
User Password
Caller ID
Presentation Restricted
Caller ID Enabled
Version 6.4
Figure 18-19: ISDN Supp Services Table Page
The telephone extension number for the BRI endpoint.
The BRI module number to which the BRI extension pertains.
The port number (on the BRI module) to which the BRI extension is
connected.
User ID for registering the BRI endpoint to a third-party softswitch for
authentication and/or billing.
User password for registering the BRI endpoint to a third-party
softswitch for authentication and/or billing.
Note: For security, the password is displayed as an asterisk (*).
Caller ID name of the BRI extension (sent to the IP side).
The valid value is a string of up to 18 characters.
Determines whether the BRI extension sends its Caller ID information
to the IP when a call is made.

[0] Allowed = The device sends the string defined in the 'Caller ID'
field when this BRI extension makes a Tel-to-IP call.

[1] Restricted = The string defined in the 'Caller ID' field is not sent.
Enables the receipt of Caller ID.

[0] Disabled = The device does not send Caller ID information to
the BRI extension.

[1] Enabled = The device sends Caller ID information to the BRI
extension
Description
317
18. GW and IP to IP
March 2012