AudioCodes Mediant 1000 User Manual page 739

SIP User's Manual
Parameter
Web: Use Routing Table for
Host Names and Profiles
EMS: Use Routing Table For
Host Names
[AlwaysUseRouteTable]
Web/EMS: Tel to IP Routing
Mode
[RouteModeTel2IP]
Outbound IP Routing Table
Web: Outbound IP Routing
Table
EMS: SIP Routing > Tel to IP
[Prefix]
Inbound IP Routing Table
Web: Inbound IP Routing Table
EMS: SIP Routing > IP to Hunt
[PSTNPrefix]
Version 6.4
Source Number and also as the Tel Display Name, and
Presentation is set to Allowed (0). If no Display Name is
received from IP, the IP Source Number is used as the Tel
Source Number and Presentation is set to Restricted (1).
For example: When 'From: 100 <sip:200@201.202.203.204>' is
received, the outgoing Source Number and Display Name are set
to '100' and the Presentation is set to Allowed (0).
When 'From: <sip:100@101.102.103.104>' is received, the
outgoing Source Number is set to '100' and the Presentation is set
to Restricted (1).
Determines whether to use the device's routing table to obtain the
URI host name and optionally, an IP profile (per call) even if a
Proxy server is used.

[0] Disable = Don't use internal routing table (default).

[1] Enable = Use the Outbound IP Routing Table'.
Notes:

This parameter appears only if the 'Use Default Proxy'
parameter is enabled.

The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
For a description of this parameter, see 'Configuring Outbound IP
Routing Table' on page 271.
This parameter table configures the Outbound IP Routing Table for
routing Tel-to-IP and IP-to-IP calls. The format of this parameter is
as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId,
PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
PREFIX_TransportType, PREFIX_SrcTrunkGroupID,
PREFIX_DestSRD, PREFIX_CostGroup, PREFIX_ForkingGroup;
[\PREFIX]
For example:
PREFIX 0 = *, domain.com, *, 0, 255, $$, -1, , 1, , -1, -1, -1,,;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1,,;
Notes:

This parameter can include up to 200 indices.

For a detailed description of the table's parameters and for
configuring this table using the Web interface, see 'Configuring
Outbound IP Routing Table' on page 271.

For a description on using ini file table parameters, see
'Configuring ini File Table Parameters' on page 84.
This parameter table configures the routing of IP calls to Trunk
Groups (or inbound IP Groups). The format of this parameter is as
follows:
739
A. Configuration Parameters Reference
Description
March 2012