AudioCodes Mediant 1000 User Manual page 697

SIP User's Manual
Parameter
Web/EMS: Outgoing Calls
Behavior
[ISDNOutCallsBehavior]
Version 6.4
more flexible application control on the UUI. When this bit is
not set (default behavior), CC implements the UUI-protocol as
specified in the ETS 300-403 standards for Implicit Service 1.

[65536] GTD5 TBCT = CC implements the VERIZON-GTD-5
Switch variant of the TBCT Supplementary Service, as
specified in FSD 01-02-40AG Feature Specification Document
from Verizon. Otherwise, TBCT is implemented as specified in
GR-2865-CORE specification (default behavior).
Note: When using the ini file to configure the device to support
several ISDNGeneralCCBehavior features, add the individual
feature values. For example, to support both [16] and [32]
features, set ISDNGeneralCCBehavior = 48 (i.e., 16 + 32).
Determines several behaviour options (bit fields) that influence
the behaviour of the ISDN Stack outgoing calls. To select options,
click the arrow button, and then for each required option, select 1
to enable. The default is 0 (i.e., disable).

[2] USER SENDING COMPLETE =The device doesn't
automatically generate the Sending-Complete IE in the Setup
message. If this bit is not set, the device generates it
automatically in the Setup message only.

[16] USE MU LAW = The device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends G.711-
A-Law in outgoing voice calls.
Note: This option is applicable only to the Korean variant.

[128] DIAL WITH KEYPAD = The device uses the Keypad IE
to store the called number digits instead of the CALLED_NB
IE.
Note: This option is applicable only to the Korean variant
(Korean network). This is useful for Korean switches that don't
accept the CALLED_NB IE.

[256] STORE CHAN ID IN SETUP = The device forces the
sending of a Channel-Id IE in an outgoing Setup message
even if it's not required by the standard (i.e., optional) and no
Channel-Id has been specified in the establishment request.
This is useful for improving required compatibility with
switches. On BRI lines, the Channel-Id IE indicates 'any
channel'. On PRI lines, it indicates an unused channel ID,
preferred only.

[572] USE A LAW = The device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends the
default G.711-Law in outgoing voice calls.
Note: This option is applicable only to the E10 variant.

[1024] = Numbering plan/type for T1 IP-to-Tel calling numbers
are defined according to the manipulation tables or according
to the RPID header (default). Otherwise, the plan/type for T1
calls are set according to the length of the calling number.

[2048] = The device accepts any IA5 character in the
called_nb and calling_nb strings and sends any IA5 character
in the called_nb, and is not restricted to extended digits only
(i.e., 0-9,*,#).

[16384] DLCI REVERSED OPTION = Behavior bit used in the
IUA interface groups to indicate that the reversed format of the
DLCI field must be used.
Note: When using the ini file to configure the device to support
697
A. Configuration Parameters Reference
Description
March 2012