AudioCodes Mediant 1000 User Manual page 29

SIP User's Manual

To set a configuration URL:
1. Obtain the IP address of the configuration HTTP server (e.g., 36.44.0.6).
2. Connect a telephone to one of the FXS ports.
3. Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, and 5).
4. Wait for the 'configuration menu' voice prompt to be played.
5. Dial 31 followed by the # key; the current IP address is played.
6. To change the IP address:
a. Press the # key.
b. Dial the configuration server's IP address. Use the star (*) key instead of dots
("."), e.g., 36*44*0*6, and then press # to finish.
c. Review the configuration server's IP address, and then press 1 to save.
7. Dial 32 followed by the # key, and then do the following to change the configuration
file name pattern:
a. Press the # key.
b. Select one of the patterns listed in the table below (aa.bb.cc.dd denotes the IP
address of the configuration server):
# Configuration File Name Pattern
1 http://aa.bb.cc.dd/config.ini
2 https://aa.bb.cc.dd/config.ini
3 http://aa.bb.cc.dd/audiocodes/<MAC>.ini
4 http://aa.bb.cc.dd:8080/config.ini
5 http://aa.bb.cc.dd:1400/config.ini
http://aa.bb.cc.dd/cgi-
6
bin/acconfig.cgi?mac=<MAC>&ip=<IP>
c. Press the selected pattern code, and then press # to finish.
8. Press 1 to save, and then hang up the handset. The device retrieves the configuration
from the HTTP server.
Version 6.4
2. Assigning the VoIP LAN IP Address
Description
Standard config.ini.
Secure HTTP.
The device's MAC address is appended to the file
name (e.g.,
http://36.44.0.6/audiocodes/00908f012300.ini).
HTTP on port 8080.
HTTP on port 1400.
Generating configuration per IP/MAC address
dynamically, using a CGI script. See perl example
below.
29 March 2012