Configuring Metering Tones - AudioCodes Mediant 1000 User Manual

SIP User's Manual

To configure the keypad features
1. Open the Keypad Features page (Configuration tab > VoIP menu > GW and IP to IP
submenu > Analog Gateway submenu > Keypad Features).
2. Configure the keypad features as required. For a description of these parameters, see
'Configuration Parameters Reference' on page 541.
3. Click Submit to apply your changes.
4. To save the changes to the flash memory, see 'Saving Configuration' on page 482.

18.6.2 Configuring Metering Tones

The FXS interfaces can generate 12/16 KHz metering pulses toward the Tel side (e.g., for
connection to a pay phone or private meter). Tariff pulse rate is determined according to
the device's Charge Codes table. This capability enables users to define different tariffs
according to the source/destination numbers and the time-of-day. The tariff rate includes
the time interval between the generated pulses and the number of pulses generated on
answer.
Version 6.4
Figure 18-20: Keypad Features Page
321
18. GW and IP to IP
March 2012