Parameter
Web: NPI
EMS: Number Plan
Web: TON
EMS: Number Type
Web: Presentation
EMS: Is Presentation
Restricted
18.3.3 Configuring Redirect Number IP to Tel
The Redirect Number IP > Tel page allows you to configure IP-to-Tel redirect number
manipulation rules. This feature allows you to manipulate the value of the received SIP
Diversion, Resource-Priority, or History-Info headers, which is then added to the
Redirecting Number Information Element (IE) in the ISDN Setup message that is sent to
the Tel side.
SIP User's Manual
The Numbering Plan Indicator (NPI) assigned to this entry.
[0] Unknown (default)
[9] Private
[1] E.164 Public
[-1] Not Configured = value received from PSTN/IP is used
Notes:
This parameter is applicable only to Number Manipulation tables for
IP-to-Tel calls.
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page
The Type of Number (TON) assigned to this entry.
If you selected 'Unknown' for the NPI, you can select Unknown [0].
If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].
If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4] or Abbreviated [6].
Notes:
This parameter is applicable only to Number Manipulation tables for
IP-to-Tel calls.
The default is 'Unknown'.
Determines whether Caller ID is permitted:
Not Configured = Privacy is determined according to the Caller ID
table (see Configuring Caller Display Information on page 327).
[0] Allowed = Sends Caller ID information when a call is made using
these destination/source prefixes.
[1] Restricted = Restricts Caller ID information for these prefixes.
Notes:
This field is applicable only to Number Manipulation tables for
source number manipulation.
If 'Presentation' is set to 'Restricted' and the AssertedIdMode
parameter is set to 'P-Asserted', the From header in the INVITE
message includes the following: From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id' header.
260
Mediant 600 & Mediant 1000
Description
266
Document #: LTRT-83310