AudioCodes Mediant 1000 User Manual page 659

SIP User's Manual
Parameter
[EnableCallerIDTypeTwo]
EMS: Caller ID Timing Mode
[AnalogCallerIDTimingMod
e]
EMS: Bellcore Caller ID
Type One Sub Standard
[BellcoreCallerIDTypeOne
SubStandard]
EMS: ETSI Caller ID Type
One Sub Standard
[ETSICallerIDTypeOneSub
Standard]
Web: Asserted Identity Mode
EMS: Asserted ID Mode
[AssertedIdMode]
Version 6.4
cpc=payphone
Notes:

This parameter is applicable only to FXS interfaces.

For this parameter to be enabled, you must also set the parameter
EnableCallingPartyCategory to 1.
Disables the generation of Caller ID type 2 when the phone is off-
hooked. Caller ID type 2 (also known as off-hook Caller ID) is sent to a
currently busy telephone to display the caller ID of the waiting call.

[0] = Caller ID type 2 isn't played.

[1] = Caller ID type 2 is played (default).
Determines when Caller ID is generated.

[0] = Caller ID is generated between the first two rings (default).

[1] = The device attempts to find an optimized timing to generate
the Caller ID according to the selected Caller ID type.
Notes:

This parameter is applicable only to FXS interfaces.

If this parameter is set to 1 and used with distinctive ringing, the
Caller ID signal doesn't change the distinctive ringing timing.

For this parameter to take effect, a device reset is required.
Determines the Bellcore Caller ID sub-standard.

[0] = Between rings (default).

[1] = Not ring related.
Note: For this parameter to take effect, a device reset is required.
Determines the ETSI FSK Caller ID Type 1 sub-standard (FXS only).

[0] = ETSI between rings (default).

[1] = ETSI before ring DT_AS.

[2] = ETSI before ring RP_AS.

[3] = ETSI before ring LR_DT_AS.

[4] = ETSI not ring related DT_AS.

[5] = ETSI not ring related RP_AS.

[6] = ETSI not ring related LR_DT_AS.
Note: For this parameter to take effect, a device reset is required.
Determines whether the SIP header P-Asserted-Identity or P-
Preferred-Identity is used in the generated INVITE request for Caller
ID (or privacy).

[0] Disabled = None (default)

[1] Adding PAsserted Identity

[2] Adding PPreferred Identity
This parameter determines the header (P-Asserted-Identity or P-
Preferred-Identity) used in the generated INVITE request. The header
also depends on the calling Privacy (allowed or restricted).
These headers are used to present the originating party's Caller ID.
The Caller ID is composed of a Calling Number and (optionally), a
Calling Name.
These headers are used together with the Privacy header. If Caller ID
is restricted (i.e., P-Asserted-Identity is not sent), the Privacy header
659
A. Configuration Parameters Reference
Description
7 Payphone user
March 2012