Danfoss VLT 5000 Series Operating Instructions Manual page 152

®
VLT 5000 Series
Description of choice:
In some cases this dynamic compensation can
cause resonance's in the DC link and should then
be disabled. Typical cases are where a line choke or
a passive harmonic filter (e.g. filters AHF005/010)
is mounted in the mains supply to the frequency
converter to suppress harmonics. Can also occur
on mains with low short circuit ratio.
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A9.02 - VLT is a registered Danfoss trademark
151