Danfoss VLT 5000 Series Operating Instructions Manual page 114

delay time has been set in parameter 120; also,
a reference signal must be present.
145 Minimum DC brake time
(DC BRK MIN. TIME)
Value:
0 - 10 sec.
Function:
If a minimum DC brake time is necessary before a new
start is possible, this parameter can be set.
Description of choice:
Select the desired time.
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A9.02 - VLT is a registered Danfoss trademark
0 sec.
®
VLT 5000 Series
113