Network Topology - Raisecom OPCOM3100-155 User Manual

Stm-1 high capacity terminal multiplexer
Table of Contents

Advertisement

3. Regenerator REG
Regenerator REG can compensate the optical attenuation caused by
transmission fiber and regenerate new optical signal for transmission.

5.2. Network topology

OPCOM3100-155 has flexible networking capacity and high transmission
reliability, and it provides both 1+1 path protection and 2F SNC-P protection.
1. Point-to-point network consists of 2 TM devices and transmits STM-1, E1
and Ethernet services.
E 1 e l e c t r i c a l s i g n a l /
E t h e r n e t s i g n a l
2. Chain topology
Chain topology is made up of two TM devices and several ADM devices.
Data is often transmitted in bi-direction and less optical fiber is needed.
TM
E1 electrical signal/
Ethernet signal
3. Ring topology
T M
o p t i c a l
Figure 5-3 point-to-point topology
STM-1 optical
signal
E1 electrical signal/
Ethernet signal
Figure 5-4 chain topology
S T M - 1
s i g n a l
E 1 e l e c t r i c a l s i g n a l /
E t h e r n e t s i g n a l
ADM
STM-1 optical
12
Raisecom Technology Co., Ltd
T M
TM
signal
E1 electrical signal/
Ethernet signal

Advertisement

Table of Contents
loading

Table of Contents