Understanding Automatic Operation - Bennett Marine AutoTrimPro Installation & User Manual

Understanding Automatic Operation

The following information is not
required reading to operate your
AutoTrim Pro in automatic mode.
However this section is designed
to provide you with an in-depth
understanding of how automatic
operation will effect your vessel in
various states.
Normal Operating States
The Bennett ATP system utilizes
the information about the boat's
pitch and roll position to determine
the basic operation state that the
boat is being used in. The basic
state types of use are:
1. Rest
2. Idling
3. Acceleration
4. Planing
5. Turning
6. Deceleration
In normal operation the boat
will progress through these basic
operation states. The following
example shows how a boat may
progress through these operating
states in normal use.
Bennett Marine AutoTrim Pro | Need help? Call (954) 427-1400
Rest
Idle
Acceleration
Planing
Turning
Deceleration
Idle
Rest
39