Bennett Marine AutoTrimPro Installation & User Manual page 34

Manual Mode Buttons & Indication
The Sun and Moon buttons are also
used in different sequences to enter
calibration modes and set up mode.
Manual Trim Tab Buttons
The manual trim tab buttons can be
used to manually lower and raise the
trim tabs, immediately disengaging
automatic controls.
Lowers
Port
Bow
Raises
Port
Bow
Although the manual mode buttons
are intuitive and self-explanatory, the
movement of the trim tabs operate in
reverse of what you may think,
Port bow
lowers when
Stbd. tab is
deployed
Port tab
deploys
34 Bennett Marine AutoTrim Pro | Need help? Call (954) 427-1400
Lowers
Stbd.
Bow
Raises
Stbd.
Bow
Stbd. bow
lowers when
port tab is
deployed
Stbd.tab
deploys
meaning the port (left) trim tab
controls the starboard (right) bow.
Conversely, the starboard (right) trim
tab controls the port (left) bow.
Upper right button "DN"
(STBD Bow DN) Pressing this
button will cause the port tab to go
down. When the port tab is extended,
the starboard bow will be lowered.
Upper left button "DN"
(Port Bow DN) Pressing this button
will cause the starboard tab to go
down. When the starboard tab is
extended, the port bow will
be lowered.
Lower Right "BOW UP" Button
(STBD Bow UP) Pressing this
button will cause the port tab to
come up. When the port tab is
retracted, the starboard bow will
be raised.
Lower Left "BOW UP" Button
(PORT BOW UP) Pressing this
button will cause the starboard tab to
come up. When the starboard tab is
retracted, the port bow will be raised.
See page "Trim Tab Basics" on page
28 for additional information on how
the movement of trim tabs affects the
pitch and roll of your boat.
Continue on to the next section for
information on automatic and
semi-automatic features.
continued