Section 1 A Basic Product Understanding - Bennett Marine AUTO TAB CONTROL Owner's Manual & Installation Instructions

Congratulations!
You are the owner of the most sophisticated Trim Tab control
system in the world. Nothing will create a more efficiently trimmed
boat than the ATC. It constantly monitors your boat's position and
uses your trim tabs to maintain your optimal cruising attitude.
SECTION 1
A BASIC PRODUCT UNDERSTANDING
The Bennett ATC system is composed of three main components:
2
This pdf was downloaded from
A: ATC Keypad — The ATC Keypad enables you to
turn the ATC system ON and OFF, and set the Zero
Point for your boat's best running attitude. The up
and down arrows will flash showing trim tab adjust-
ments.
B: ATC Control Unit — The ATC Control Unit is
a sophisticated processor and attitude sensor. It
analyzes and calculates attitude readings. It "learns"
and stores the characteristics of your boat in its
memory and uses this information for precise trim
tab corrections. Important: The ATC Control Unit
must be mounted correctly or the ATC system
will not function as it should.
C: Relay Module — The Relay Module Links
the Hydraulic Power Unit to the Auto Tab Control
system.
MarineSupplyDock.com