Disabling The Led Alert For Systems Without Sensors - Bennett Marine AutoTrimPro Installation & User Manual

System Set Up:

Disabling the LED Alert for Systems Without Sensors

See page 6 to learn about the purpose of sensors, to determine if you currently
have sensors or not, and how to add them.
1. The upper yellow LEDs should
be flashing. This is the system's
indication that there are no
actuator sensors connected.
22 Bennett Marine AutoTrim Pro | Need help? Call (954) 427-1400
Actuator Position Calibration
2. Press and hold the bright
(Sun) and dim (Moon) buttons
simultaneously for about three
seconds. The upper yellow lights
should stop flashing and all of
yellow LEDs in the corners
should be illuminated
continuously.