Bennett Marine AutoTrimPro Installation & User Manual page 36

Semi-Automatic Controls
Using the "All UP" Button
When the ALL UP button is pressed
the ATP controller will fully retract
the trim tabs. The ATP controller will
Fully Retracts (Raises) Both Tabs
monitor the position of the trim tabs
and keep trying to retract the tabs
until the tabs have reached the
full-up position. The ALL UP button
provides a quick and easy way to
bring the tabs full up if the tabs are
being used in a manual mode. It is
normal for the user to retract the trim
tabs immediately after getting the
boat on plane.
36 Bennett Marine AutoTrim Pro | Need help? Call (954) 427-1400
continued
CAUTION
The ALL UP Button will bring the
trim tabs to the full-up position.
This can have a dramatic effect on
the attitude of the vessel as both tabs
are retracted.
The Tabs will retract at the same
speed, so it is normal for the tab
that was deployed further to retract
slower. The boat may react by
increasing speed, or listing as the
tabs are brought to a full-up position.